System Pictures

This is what a node setup looks like. In this case, the system is configured to use a T1 card and channel bank. There is a fanless mini-itx system in the black box just below the radio.

This is the rear view of the same system.

Here is a node I'm about to put in Las Vegas, NV. It has a 1U 12V SolarPC, Channel Bank, Mitrek, and Motorola Duplexer.

This is a picture of a Mini-itx system using our Quad Radio PCI board. This setup contains a VIA MEII-6000 motherboard,

a mini-box M1 13.8 Volt DC-DC power supply, and a IDE CF reader. There are no fans. The case is a Solar PC 1U base case. This system draws less than 2 amps from the 13.8V power supply.